Tensile Strength≥ 30n/5cm Surface Carbon Fiber Mat by Wet Process

• Customization: Available
• Transport Package: Carton
• Trademark: JLON
• Model NO.: JL-T-30
• HS Code: 7019
• Production Capacity: 500000/Month

Product Description

Product Introduction: JL-T-30 is a carbon fiber mat produced by wet process using carbon fiber as raw material and customized water-based environmentally friendly adhesive. As a reinforced mat for the gel coat layer, it is a fiber with anisotropic distribution. Its softness makes it suitable for edges, irregular shapes, and complex curved surfaces, and is suitable for various composite material processes. It can quickly dissolve with various resins such as EP, VE, UP, and PU, forming a resin rich layer between the fiber gaps, giving a smooth and flat surface to the product, effectively avoiding pits and fiber patterns after forming. Highlighting the strengthening of inter layer shear strength, surface toughness, and excellent chemical and corrosion resistance.
 

 

Application scope: mainly used for surface reinforcement layer of fiberglass products, external modification layer of composite materials, etc.
 

Main features: evenly dispersed fibers, soft texture, good surface smoothness of fibers, low adhesive content, fast resin penetration rate, and good mold adhesion.

Apperance	White, Clean, and Flat
Weight	30±2g/m2
Adhesive Content	8±2%
Moisture Content	≤0.2%
Tensile Strength(N/5cm)	≥30
Tensile Strength(N/5cm)	≥10

Attention for hand lay up process:
1. The surface mat generally adopts two types: 30g/m2 and 50g/m2.
2. The application of surface mat on the mold allows for splicing, and it is not recommended to overlap to avoid affecting the flatness of the product.
3. After the surface felt is laid according to the geometric shape of the mold, it is recommended to use a fiberglass tool dipped in the resin and slowly press it, not like brushing a cloth, which may cause surface movement and make it difficult to remove bubbles.
4. After the carbon fiber surface mat has solidified, the bubbles should be carefully picked out and polished with sandpaper to remove dust dry. Another layer of resin can be applied to lay other types of reinforcement layers.

FAQ
Q1.Can your company customize products?
A: Yes, We usually discuss with customers and help them find solutions.
Q2. How can I get a sample from you to check quality?
A: Usually a sample will be prepared within one week after specification agreed.
Q3. What about your delivery time? Can we receive our goods on time?
A: Usually around 2-3 weeks after order confirmed. Exact delivery time depends on order quantity and Off-season/ busy season.
Q4. What is the Guarantee to buy your products? How to resolve quality complaints?
A: Offer TDS of each lot of production for confirmation before delivery.Once you have any quality problem, you can provide samples /pictures /test data. With our quality tracking system, we will give you feedback in short time. If the quality problem confirmed,we will send you replacement or make refund as you like.
Q5. What are your terms of payment?
A: Usually we do EXW, FOB, CIF, and DDU.