Introduction:
Sheet moulding compound (SMC) or sheet moulding composite is a ready to mould glass-fibre reinforced polyester material primarily used in compression moulding. Alternatively the resin and related materials may be mixed on site when a producer wants greater control over the chemistry and filler.
Sheet moulding compound (SMC) is manufactured by dispersing long strands (usually >1") of chopped fiber (commonly glass fibers or carbon fibers on a bath of thermoset resin (commonly polyester resin, vinyl ester or epoxy resin)). The longer fibers in SMC result in better strength properties than standard bulk moulding compound (BMC) products. Also we provide long and continuous fiber or woven roving for extra reinforcement.
Features:
High mechanical strength, low shrink, low density, dimensional stability, corrosion resistance, fire resistance,
Typical Application:
Electrical applications, corrosion resistant needs, structural components at low cost, automotive, sanitary, transit.
| Type |
Application |
| General Purpose |
Non-electric products such as chair, water tank |
| Heat and Corrosion Resistant |
Composite materials intended for use in sanitary, such as shower base, bath tub, walls |
| Electric |
Satisfy different flame ratings such as UL94 HB, UL94 V0. High strength, UV stability. Suitable to make electric parts used indoor or outside |
| High Strength & A Grade Surface |
High strength, good tenacity, A grade surface. Suitable to make door skin and auto parts such as bumper, panel, truck high roof |
Typical Specification:
| Physical Property |
Units |
Standard |
Data |
Remark |
| Specific Gravity |
( g/cm³) |
ASTM D-792 |
1.7-1.9 |
- |
|
| Glass fiber content |
% |
GB/T15568-95 |
18-40 |
- |
|
| Water absorption |
% |
ASTM D-570 |
0.2-0.3 |
24Hrs@23C |
|
| Average Shrinkage |
% |
ASTM D-955 |
0.05-0.2 |
- |
|
| Tensile Strength |
Mpa |
ASTM D-638 |
62 |
- |
|
| Tensile Modulus |
Gpa |
ASTM D-638 |
15 |
- |
|
| Flexural Strength |
Mpa |
ASTM D-790 |
158 |
- |
|
| Flexural Modulus |
Gpa |
ASTM D-790 |
14 |
- |
|
| Compressive Strength |
Mpa |
ASTM D-695 |
185 |
- |
|
| Impact Strength-Izod Notched |
J/m |
ASTM D-256 |
640 |
- |
|
| Impact Strength-Izod Unnotched |
J/m |
ASTM D-4812 |
854 |
- |
|
| Barcol Hardness |
- |
ASTM D-2583 |
30-60 |
- |
|
| Heat Distortion Temp |
C |
ASTM D-648 |
>204 |
264 psi |
|
| Flammability |
cm/min |
ASTM D-635 |
1.7 |
Average Burn Rate |
|
| Color |
- |
RAL |
7035 |
- |
|
SMC tray Product Description
The SMC shower trays are a standard product installed during the construction of domestic and commercial premises. These trays are used everywhere, from basic building construction to highly advanced and modern bathroom designs. As a product that gets used on a daily basis, it is necessary for them to be highly durable and robust.
SMC Shower trays are also called hot cast shower trays, which is a popular name for them in America.
The material used to produce the shower trays is high-grade Sheet Mould Compound (SMC), which is amazingly strong while also remaining light in weight. Moreover, the material is non-hygroscopic, non-corrodible and ideally suited for aesthetically pleasing shower trays. These fantastic properties made SMC the best choice of material for the manufacture of the shower tray range.
We got 3 sets 2000Ton Presser and 10 different type mold for your choice.
Customized service availiable .
| Colour: multi color |
| Made of durable SMC (sheet molding compound) |
| Self supporting, twice stronger than artificial Marble |
| 2 year warranty |
| Size(mm):1300*1000*4 |
| Stone effect surface |
| Delivery time: 25-30 days |
| Life:25years |
){kind=link}